Animal research

Go directly to products ↓

Laminar flow solutions for animal facilities protect the laboratory animal, the operator and the environment at the same time. Poly Temp Scientific supplies the animal research equipment from Nordic Labtech, developed for modern animal research facilities and refined in cooperation with partners such as the Karolinska Institute. From changing cages to receiving rodents and performing minor procedures, every task takes place in a controlled airflow with HEPA H14 filtration, in line with EN 12469. This category brings together mobile and fixed cage changing stations, receiving stations and heated operating tables, all available in several sizes and with plenty of room for customisation. This lets you set up an animal facility that meets requirements for animal welfare, occupational safety and cross-contamination control. For general microbiological or BSL work, please see our biological safety cabinets.

Showing all 4 results

n-Safe MCCU mobile cage changing unit
✓ EN 12469 compliant with inflow greater than 0.42 m/s with both sides open✓ Dual ventilated work surfaces prevent left-right cross contamination
Price on request This product has multiple variants. The options may be chosen on the product page More information
n-Laf NPU cage changing station
✓ Laminar flow from HEPA H14 filters for a clean, animal-safe environment✓ Ventilated work table and rear wall protect the operator against dust
Price on request

Add to quote

This product has already been added to the quote request list.

View quote list

More information
n-Safe receiving station
✓ Receiving station for the safe intake of rodents✓ Operates to BSC Class II: protects animal, operator and environment
Price on request This product has multiple variants. The options may be chosen on the product page More information
n-Laf surgery table for rodents
✓ Acid proof stainless steel AISI316 for maximum hygiene and chemical resistance✓ Heated, perforated downdraft Corian worktop protects against allergens and anesthesia gases
Price on request

Add to quote

This product has already been added to the quote request list.

View quote list

More information

Laminar flow equipment for the animal facility

An animal facility places high demands on hygiene and air control. Dust, allergens and micro-organisms must not spread between animal rooms, while the operator has to be protected from rodent allergens. That is why the animal research equipment from Nordic Labtech combines a laminar airflow with HEPA H14 filtration. The clean, filtered air flows evenly across the work surface and keeps the animal, the operator and the environment separated. The constructions comply with EN 12469 and are developed in close cooperation with researchers, including the Karolinska Institute, so that the ergonomics and workflow match daily practice in the animal facility.

Animal facility equipment in this range

n-Safe MCCU mobile cage changing unit: a mobile station for safely changing cages at the point of use. Available in two sizes and ideal when you want to move the cage changing station between different animal rooms.

n-Laf NPU cage changing station: a fixed cage changing station with integrated cage dispensers and a ventilated work table. Fully customisable and suited to a high throughput of cages.

n-Safe receiving station: a wall-mounted receiving station for the safe intake of rodents between zones. Available in three sizes and matched to your routes and barriers.

n-Laf operating table for rodents: a heated stainless steel downdraft work surface for minor procedures. The downward airflow removes fumes and particles, and the work surface is built entirely to measure.

Difference between mobile and fixed cage changing stations

A mobile cage changing station such as the n-Safe MCCU can be wheeled to the animal room and used where you need it, which is convenient for changing locations or a compact space. A fixed station such as the n-Laf NPU is intended for a central changing point with high capacity and permanent cage dispensers. The right choice depends on your layout, the number of cages per day and your routes. Our specialists are happy to advise on the best setup and dimensions.

Buying advice and customisation

Almost all animal research solutions are built to measure and tailored to your room, barrier system and number of animals. When choosing, we look at the type of task (changing, receiving or procedures), the required protection level and the integration into your existing animal facility. Because the configuration differs per project, we supply this equipment on a quotation basis with advice that suits your setup. To make the right choice, first define which tasks take place in the animal facility and where the barriers between clean and dirty zones run. Then select the right station for each task: a mobile cage changing station for flexibility, a fixed station for volume, a wall-mounted receiving station for intake and an operating table for minor procedures. Our specialists help you align the laminar flow, the dimensions and the HEPA H14 filtration, so that your animal facility layout is correct from the start. Contact us for a no-obligation proposal.

Frequently asked questions about animal research

What is a cage changing station?

A cage changing station is a laminar flow workstation used to safely change rodent cages. The filtered airflow protects both the animal and the operator from cross-contamination and allergens, keeping clean and dirty cages separated.

Why is laminar flow important in an animal facility?

Laminar flow with HEPA H14 filtration provides an even, clean airflow across the work surface. This keeps micro-organisms, dust and rodent allergens under control and separates the animal, operator and environment, in line with EN 12469.

What is the difference between a mobile (MCCU) and a fixed cage changing station?

A mobile MCCU is a wheeled station you bring to the animal room, ideal for changing locations. A fixed station with cage dispensers is intended for a central changing point with high capacity. The choice depends on your layout and the number of cages per day.

What protection does this equipment offer?

The equipment protects three parties at once: the laboratory animal from outside contamination, the operator from allergens and aerosols, and the environment from spread. This is achieved with laminar flow and HEPA H14 filters in line with EN 12469.

Can the equipment be customised?

Yes. Almost all animal research solutions, from cage changing stations to receiving stations and operating tables, are built to measure and tailored to your room, barrier system and number of animals. You receive a customised quotation for this.