Matte-black conversion kit that changes a compatible TRACE dual monitor mount into a mount for one display up to 38 inches.
Ergotron TRACE 47-109-224 changes an existing TRACE dual monitor mount into a single-display configuration. This conversion suits a workstation moving from two smaller monitors to one larger or curved screen. The kit replaces the display interface only and is therefore not a standalone monitor arm.
The conversion kit is intended for TRACE Dual Monitor Mount 45-631-224 and 45-631-216. Once installed, the configuration supports one display up to 38 inches weighing from 5.5 to 11.6 kg. This load range differs from that of the complete TRACE Single Monitor Mount 45-630, so the intended screen specifications must be checked before conversion.
The tilting pivot provides 75 degrees of upward and 5 degrees of downward tilt. The assembled mount retains 240 degrees of side-to-side movement and 360-degree display rotation. The monitor attaches through a 75 x 75 or 100 x 100 mm VESA MIS-D pattern.
Article 47-109-224 has a matte-black finish and contains the tilting monitor pivot and attachment hardware. It enables an existing TRACE installation to be adapted without specifying an entirely new mount. Ergotron lists a product weight of 0.9 kg and an Ergotron warranty of fifteen years.
| Brand | Ergotron |
|---|---|
| Article code | 47-109-224 |
| GTIN | 00698833082579 |
| Product category | Accessories |
| Display | ≤38 inch |
| Weight capacity | ≤25.6 lbs / ≤11.6 kg |
| Tilt | 80° * |
| Pan | 240° |
| Rotation | 360° |
| VESA | MIS-D |
| Warranty | 15 years |
| Product weight | 0.9 kg |
| Shipping weight | 1.2 kg |
| Shipping dimensions | 17.8″ x 13.6″ x 6.7″ (45 x 35 x 17 cm) |
| Mounting standard | VESA MIS-D, 75/100 (hole pattern = 100 x 100 mm & 75 x 75 mm) |
It converts a compatible TRACE dual monitor mount for use with one display while retaining the existing support structure.
Ergotron specifies TRACE Dual Monitor Mount models 45-631-224 and 45-631-216 as compatible base products.
After conversion, the configuration is intended for one monitor weighing from 5.5 to 11.6 kg.
Yes. Ergotron positions the kit for displays, including curved models, up to 38 inches when weight and VESA pattern remain within specification.
The pivot provides 75 degrees of upward tilt and 5 degrees of downward tilt.
No. The package contains a tilting pivot and attachment hardware and requires a compatible TRACE dual monitor mount.