Laboratory equipment, advice and maintenance
Expert advice0515 575 105

Thermo Scientific S55-S swinging-bucket rotor

Article no.: 45594Delivery timeiFor the current delivery time, please contact us by phone at +31 515 575 105 or send us an email at [email protected].

Thermo Scientific S55-S swinging-bucket rotor, 4 x 2.2 mL, for the Sorvall MTX 150 / MX 120+ / MX 150+ range. Rotor maximum: 55,000 rpm and 258,826 × g. Actual limits depend on the complete instrument and labware configuration.

4 x 2.2 mL
Rotor up to 55,000 rpm
swinging-bucket rotor
Sorvall MTX / MX+
40+ years of expertise In-house service team Fast delivery in the Netherlands

Description

The Thermo Scientific S55-S is a swinging-bucket rotor with a nominal capacity of 4 x 2.2 mL. The rotor catalogue number is 45594. The rotor’s nominal maximum speed is 55,000 rpm. The centrifuge and tube combination may impose a lower limit; nominal capacity is not the permitted filling volume for every tube.

Configuration and application: S55-S

In a swinging-bucket rotor, buckets move to a horizontal position during the run. This geometry suits density-gradient separations where tube geometry, band formation and fraction recovery matter. Select tubes and adapters for the specified bucket configuration.

Compatible instrument family

Sorvall MTX 150, Sorvall MX 120+, Sorvall MX 150+.

The rotor is listed for this instrument family. This does not mean every instrument can achieve the rotor’s maximum speed. A lower-speed centrifuge remains limited to its own rated speed; approved rotor settings, sample density and labware may impose further restrictions.

Tubes, accessories and quotation

Use the manufacturer rotor guide in Downloads to identify tube sizes, working fill volumes, closures and any required adapters. Include the instrument model, rotor catalogue number and sample requirements with your request. Poly Temp confirms the configuration, supplied package and current availability before ordering.

The stated rpm and RCF values are technical maxima, not an operating protocol. The lowest permitted limit of the centrifuge, rotor, bucket, tube, closure and adapter governs use. Sample density, chemical compatibility, fill volume, temperature and rotor condition may require a lower speed. Use only approved combinations in accordance with current manufacturer instructions.

Rotor mounting: Use the approved quick-setting rotor version. Older screw-type rotors are not interchangeable with the MTX 150 / MX+ quick-setting mounting system.

View Sorvall ultracentrifuges

Compare ultracentrifuge rotors by rotor geometry, tube requirements and centrifuge model.

Specifications

Catalogue number 45594
Model S55-S
Type swinging-bucket rotor
Nominal capacity 4 x 2.2 mL
Instrument family Sorvall MTX 150 / MX 120+ / MX 150+
Maximum rotor speed 55,000 rpm
Maximum rotor RCF 258,826 × g
K factor (rotor guide) 44
Product weight 1.19 kg

Frequently asked questions

Will this fit any Sorvall centrifuge?

No. This rotor is listed for Sorvall MTX 150 / MX 120+ / MX 150+. The exact instrument, mounting system and labware must be checked.

Is the listed capacity the working fill volume?

Not always. Nominal capacity and permitted fill volume can differ with tube material, closure and application. Follow the tube-specific manufacturer limits.

Is the complete package included?

The quotation specifies the supplied parts. Tubes, closures, adapters and installation components may need to be ordered separately.

00