Laboratory equipment, advice and maintenance
Expert advice0515 575 105

Thermo Scientific S58-A fixed-angle rotor

Article no.: 45866Delivery timeiFor the current delivery time, please contact us by phone at +31 515 575 105 or send us an email at [email protected].

Thermo Scientific S58-A fixed-angle rotor, 8 x 13.5 mL, for the Sorvall MTX 150 / MX 120+ / MX 150+ range. Rotor maximum: 58,000 rpm and 288,958 × g. Actual limits depend on the complete instrument and labware configuration.

8 x 13.5 mL
Rotor up to 58,000 rpm
fixed-angle rotor
Sorvall MTX / MX+
40+ years of expertise In-house service team Fast delivery in the Netherlands

Description

The Thermo Scientific S58-A is an aluminium fixed-angle rotor with a nominal capacity of 8 × 13.5 mL. Catalogue number 45866 has a nominal maximum speed of 58,000 rpm. The selected centrifuge, tube and sample conditions may require a lower operating speed.

Configuration and application: S58-A

A fixed-angle rotor holds tubes at a fixed angle during centrifugation. This geometry is used for pelleting and, depending on the method, density-gradient separations. Working fill volume and separation conditions depend on the selected tube and protocol.

Compatible instrument family

Sorvall MTX 150, Sorvall MX 120+, Sorvall MX 150+.

The rotor is listed for this instrument family. This does not mean every instrument can achieve the rotor’s maximum speed. A lower-speed centrifuge remains limited to its own rated speed; approved rotor settings, sample density and labware may impose further restrictions.

Tubes, accessories and quotation

Use the manufacturer rotor guide in Downloads to identify tube sizes, working fill volumes, closures and any required adapters. Include the instrument model, rotor catalogue number and sample requirements with your request. Poly Temp confirms the configuration, supplied package and current availability before ordering.

The stated rpm and RCF values are technical maxima, not an operating protocol. The lowest permitted limit of the centrifuge, rotor, bucket, tube, closure and adapter governs use. Sample density, chemical compatibility, fill volume, temperature and rotor condition may require a lower speed. Use only approved combinations in accordance with current manufacturer instructions.

Rotor mounting: Use the approved quick-setting rotor version. Older screw-type rotors are not interchangeable with the MTX 150 / MX+ quick-setting mounting system.

View Sorvall ultracentrifuges

Compare rotor capacity

The S58-A has a nominal rotor capacity of 8 × 13.5 mL; the S50-A offers 6 × 30 mL. These are different rotor and tube configurations, not interchangeable tubes. Compare the approved labware and separation requirements within the Sorvall MTX / MX+ rotor range.

Specifications

Catalogue number 45866
Model S58-A
Type fixed-angle rotor
Nominal capacity 8 x 13.5 mL
Instrument family Sorvall MTX 150 / MX 120+ / MX 150+
Maximum rotor speed 58,000 rpm
Maximum rotor RCF 288,958 × g
K factor (rotor guide) 50
Product weight 1.9 kg

Frequently asked questions

Will this fit any Sorvall centrifuge?

No. This rotor is listed for Sorvall MTX 150 / MX 120+ / MX 150+. The exact instrument, mounting system and labware must be checked.

Is the listed capacity the working fill volume?

Not always. Nominal capacity and permitted fill volume can differ with tube material, closure and application. Follow the tube-specific manufacturer limits.

Is the complete package included?

The quotation specifies the supplied parts. Tubes, closures, adapters and installation components may need to be ordered separately.

00