The Thermo Scientific TDE Series ULT chest freezer stores samples stably between -50°C and -86°C. The chest design limits cold loss when opened. Furthermore, H-Drive technology delivers stable performance and fast temperature recovery. Available in 85, 360 and 566 litres for long-term storage in the laboratory.
The Thermo Scientific TDE Series ULT chest freezer stores samples stably between -50°C and -86°C. Therefore, this unit suits long-term storage and frequent access in the laboratory. Furthermore, the chest design limits cold loss when opened, because cold air stays in the lower part of the cabinet. Additionally, the horizontal layout requires little floor space. As a result, placement is possible in spaces where an upright freezer does not fit. Moreover, the series offers three capacities, so each model fits the available space.
The TDE Series operates with the H-Drive system from Thermo Scientific. Therefore, the temperature stays evenly distributed across the entire cabinet. Furthermore, the system adjusts the cooling capacity dynamically to the load. Additionally, the temperature recovers quickly after the lid is opened. As a result, the smallest model (TDEC06386) returns to setpoint within one minute. Moreover, the peak variation around the -80°C setpoint stays limited. Consequently, samples remain well protected during daily use. The key performance features are:
Energy consumption starts at 6.6 kWh per day, depending on model and temperature. Therefore, these freezers help lower energy costs. Furthermore, the low heat emission reduces the load on the HVAC system. Additionally, the series uses natural hydrocarbon refrigerants that comply with the EU F-gas regulation. Moreover, the polyurethane foam contains a non-HFC blowing agent. As a result, the environmental impact stays low. Furthermore, placement directly in the laboratory is possible, because the sound level starts at 50.9 dBA. The sustainability benefits at a glance:
Each model features the H-Drive Information Center (HIC) with touchscreen control. Therefore, the temperature is easy to read. Furthermore, a 3-digit code protects the settings against unwanted changes. Additionally, the doors are padlock-compatible. Moreover, general-purpose models for laboratory use and medical models (Class II Medical Device) for storage of blood and blood products are available. As a result, the series suits a wide range of applications. Furthermore, these freezers fit well within the pharmaceutical industry and biotech and medical diagnostics.
The TDE Series ULT chest freezer is part of the Thermo Scientific range within our ULT freezers. Therefore, Poly Temp also provides advice on installation and maintenance through our service and maintenance team. Do you have questions about the right choice? Then contact us via our contact page.
| Specification | Value |
|---|---|
| Type | Ultra-low temperature chest freezer (ULT) |
| Temperature range | -50°C to -86°C |
| Cooling technology | H-Drive system |
| Refrigerant | Natural hydrocarbons (EU F-gas compliant) |
| Capacities | 85 L / 360 L / 566 L |
| Energy consumption | From 6.6 kWh per day |
| Sound level | 50.9 to 55.5 dBA |
| Control | H-Drive Information Center (HIC) touchscreen |
| Security | 3-digit setpoint code, padlock-compatible |
| Model types | General-purpose and Class II Medical Device |
| Power supply | 230 V / 50 Hz |
| Application | Laboratory, long-term sample storage |
| SKU | Capacity (L) | Capacity (cu ft) | 2″ box capacity | Energy (kWh/day) | Recovery time after opening (min) | Exterior dimensions (HxWxD, cm) | Sound level (dBA) |
|---|---|---|---|---|---|---|---|
| TDEC06386FV | 85 | 3 | 63 | 6.6 | 1 | 111.0 x 73.2 x 83.1 | 50.9 |
| TDEC25286FV | 360 | 13 | 252 | 9.4 | 3 | 102.9 x 183.6 x 84.1 | 55.5 |
| TDEC39686FV | 566 | 20 | 396 | 11.0 | 1 | 102.9 x 244.6 x 84.1 | 52.9 |
The TDE Series ULT chest freezer cools between -50°C and -86°C. Therefore, the unit suits long-term storage of temperature-sensitive samples.
There are three models: TDEC06386 with 85 litres, TDEC25286 with 360 litres and TDEC39686 with 566 litres. As a result, each model fits the available space.
The smallest model TDEC06386 returns to setpoint within one minute. The chest design limits cold loss, because cold air stays in the lower part of the cabinet.
Yes, besides general-purpose laboratory models, Class II Medical Device models are available. These are intended for storage and preservation of blood and blood products at freezing temperatures.
Energy consumption starts at 6.6 kWh per day, depending on model and temperature. Furthermore, the low heat emission reduces the load on the HVAC system.
The series uses natural hydrocarbon refrigerants that comply with the EU F-gas regulation. Moreover, the polyurethane foam contains a non-HFC blowing agent.